As more people turn to indoor gardening to brighten up their living spaces, Click and Grow has become a popular choice for many.
These smart garden kits allow you to grow plants with minimal effort, making them perfect for anyone who wants to enjoy fresh herbs and greens without worrying about the complexities of traditional gardening.
But Can you put it in the dishwasher, or is that a bad idea? In this guide, we’ll explore the pros and cons of cleaning your Click and Grow in the dishwasher and offer some tips for keeping it in great condition.
Table of Contents
Can You Put Your Click and Grow in the Dishwasher?
The short answer is no, you should not put your Click and Grow in the dishwasher. Although it might be tempting to save time and energy by tossing your device into the machine, doing so can damage your smart garden kit in several ways.
First and foremost, the electronic components of the Click and Grow are not designed to withstand the high heat and moisture of a dishwasher cycle. Exposing your device to these conditions could cause it to short-circuit or malfunction, rendering it useless.
Additionally, the dishwasher’s harsh detergents and high-pressure water sprays can damage the surface of the Click and Grow, causing cracks, scratches, or other types of wear and tear.
This could compromise the integrity of the device and reduce its lifespan, forcing you to replace it sooner than you might have otherwise.
How to Clean Your Click and Grow Properly
Fortunately, there are several easy ways to clean your Click and Grow without risking damage to the device or compromising its performance.
Hand Wash Your Click and Grow
The most straightforward way to clean your Click and Grow is to hand wash it using a mild dish soap and warm water.
Simply remove the planting cup, rinse it with water, and gently scrub it with a soft-bristled brush or sponge. Be sure to avoid using any abrasive materials or harsh chemicals that could damage the surface of the device.
Once you’ve cleaned the planting cup, wipe down the rest of the device with a damp cloth or sponge.
Be careful not to get water on the electronic components or touch the wiring, as this could cause electrical damage.
Use Vinegar to Remove Mineral Buildup
If your Click and Grow has developed mineral buildup from hard water, you can use vinegar to dissolve the deposits and restore the device’s performance.
Simply mix equal parts white vinegar and water, soak the planting cup in the solution for an hour or two, and then rinse it thoroughly with clean water.
Be sure to avoid using too much vinegar or leaving the device in the solution for too long, as this could cause damage to the surface of the Click and Grow or affect its electronic components.
Dry Your Click and Grow Thoroughly
After you’ve cleaned your Click and Grow, be sure to dry it thoroughly to prevent water damage or mold growth.
Use a soft cloth or towel to remove any excess water from the device, paying special attention to the areas around the electronic components.
You can also air dry the Click and Grow by leaving it in a warm, dry location for several hours. Be sure to avoid using a hair dryer or other heat source to speed up the process, as this could cause damage to the device.
Looking To Buy Your Own?
Use the Link provided to check out our range here or click the image below!
Can I put my Click and Grow in the microwave?
No, you should not put your Click and Grow in the microwave. The electronic components of the device are not designed to withstand the high heat and pressure of a microwave, which could cause damage to the device and render it useless.
Can I use bleach to clean my Click and Grow?
No, you should not use bleach or any other harsh chemicals to clean your Click and Grow. These can damage the surface of the device and compromise its performance.
Stick to mild dish soap, warm water, and vinegar solutions for the best results.
Can I clean the LED light on my Click and Grow?
Yes, you can clean the LED light on your Click and Grow using a soft cloth or sponge. Be sure to avoid getting water on the electronic components or touching the wiring, as this could cause electrical damage.
You can also use a vinegar solution to remove any mineral buildup on the light.
How often should I clean my Click and Grow?
It’s a good idea to clean your Click and Grow after each growing cycle to prevent mineral buildup and ensure optimal performance.
You should also clean the device if you notice any mold or mildew growth or if it becomes visibly dirty or dusty.
How can I prevent mineral buildup in my Click and Grow?
To prevent mineral buildup in your Click and Grow, use distilled or filtered water instead of tap water, which can contain high levels of minerals.
You can also use a water softener or add a water filter to your faucet to remove impurities and minerals.
Although it might be tempting to toss your Click and Grow into the dishwasher for a quick clean, doing so can cause damage to the device and compromise its performance.
Instead, use mild dish soap, warm water, and vinegar solutions to clean your smart garden kit and keep it in great condition.
By following these simple tips, you can enjoy fresh herbs and greens from your Click and Grow for years to come.
- Do You Need a Specific Lawn for a Robotic Lawnmower? Expert Advice
- Are Robotic Lawnmowers Safe for Pets and Children? Safety Features of Robotic Lawnmowers
- Why Use Robotic Lawnmowers? Advantages of Using a Robotic Lawnmower
- Is the GARDENA SILENO City 300 Cordless or Corded? A Clear Answer
- Can the GARDENA SILENO City 300 Cut Grass at Different Heights?
- How Long Does the GARDENA SILENO City 300 Battery Last on a Single Charge? A Comprehensive Review